SMS SAFETY MONITORING EVAC SYSTEM

SMS Safety Monitoring System with Evacuate: The SMS Safety Monitor is a desktop or wall mounted, standalone worker safety monitoring unit featuring a display showing all workers by name and ID number that are using Grace worker-worn safety products. The SMS monitors for worker Alarms and alerts others by built-in bright flashing lights and playback of a pre-recorder voice alert message that is enunciated over an internal speaker and capable of driving external audio sources; useful in facilities with existing PA systems. The SMS offers these features and capabilities:

Receives ‘Panic’ and ‘Motion-timeout’ Alarms for up to 72 workers
Display of worker’s location when using Grace Locator Beacons
Bright flashing LED lights and playback of a pre-recorder voice alert message
16 open-collector output signals, configurable and steerable with various options
Alarm Relay output, form C, 5 Amp, relay contacts can be used to provide signals to any external alerting system including Fire, Security or SCADA or EVAC
Separate +12V relay-switched output on alarm, up to 1 Amp
‘Low-Battery’ indication of worker-worn products
Evacuate signaling to one, some or all workers with display of ‘EVAC signal received’ and ‘manual-acknowledgement’ by the worker
Built-in Event logger, with recorded time and date stamp of all Alarm events
Internal battery back-up with automatic charging
Battery back-up run-time approximately 24 hours in standby, 6 hours in alarm
Power input 100 – 260 VAC, 100 – 340 VDC
RF coverage area is up to approximately 150K to 200K sq-ft. depending on building construction and environment
Monitoring of Grace support equipment including Locator Beacons, T3 Repeaters
Extended range coverage available with T3 Repeater or T3 Remote Transceiver
No Monthly Fees or hidden costs
Interface With Your Existing Alarm and SCADA systems
Modular Design, Custom Engineered Solutions available

LONE/WORKER

SAFETY SYSTEMS

OSHA Section 5(a)(1) General Duty Clause… furnish… employment… which… (is) …free from recognized hazards that are causing or are likely to cause death or serious physical harm… and… OSHA 1915.84(a) … the employer shall account for each employee: 1915.84(a)(1) Throughout each work shift at regular intervals…

Lone Worker System Accessories:

Locator-Beacon: Grace Locator-Beacons are locating-devices that are placed in designated strategic area of a facility that provide location signals to Grace worker-worn products which are included in their transmitted status data. Locator-Beacons are used to display the locations on personnel on Grace SMS and Grace-Watch^® Safety Monitoring Systems, or SuperCELL^® SC500 and WorkForce^® WF2 worker-worn products. Locator-Beacon features include:

Five power settings to control the desired range of the beacon
Internal lithium battery powered
Option external wall-plug power adaptor, with internal lithium battery back-up power
Small size, weather-tight enclosure, easily mounted in most any location

T3 Repeater: The T3 Repeater is a stand-alone accessory unit that enhances signal effectiveness in difficult RF environments and extends system coverage by receiving and retransmitting signals to and from Grace worker-worn products and Grace monitoring products. T3 Repeater features include:

Powered by 90-260 VAC 50/60 Hz Single Phase 1Amp, or 100 – 360 VDC
Internal battery backup
Optional heated model for extreme cold temperatures < 0-C (32-F)
Enclosure is industrial grade, water-tight outdoors enclosure
Complies with: UL 60950-1, CSA C22.2 No. 60950-1, Canadian ICES-003

T3 Remote Transceiver: The T3 Remote Transceiver is used with Grace MS2000X or SMS base units. T3 Remote Transceiver is a cable-connected unit that allows improved signal coverage system performance by allowing the RF signaling part be placed in a more optimal location, often outside the immediate location of the base unit.

Can be mounted up to 100 feet away from the Base, allowing enhanced signal reception
Self-powered from host base unit
Enclosure is industrial grade, water-tight outdoors capable

MicroTPASS^®Repeater: The MicroTPASS^®Repeater is a small, lightweight, portable signaling repeater operating interactively with all Grace worker-worn safety products. The MicroTPASS^®Repeater extends the effective signaling range for workers that temporarily enter areas where signal range is limited, such as confined spaces or extended distances from the workers vehicle. MicroTPASS^®Repeater Features include:

Portable, operates indoors or outdoors
Internal battery powered, rechargeable
Certified intrinsically-safe for use in Hazardous locations
‘Finder’ mode to more easily recover when leaving the area
Small form-factor and size
IP67 Rated for Water/Dust ingress

SMS Safety and EVAC Base Monitor – Used with any combination of Grace Worn Devices

SMS-H SMS Safety and EVAC Base Monitor

RET-H Requires the SMS Base – Remote Enhanced Tranciever – Powered by the SMS Base – used to extend signal coverage area – can be mounted up to 100′ from the SMS Base

RET-H-HT Requires the SMS Base – Remote Enhanced Transceiver – with Heated Enclosure – Powered by 120VAC – used to extend signal coverage area – can be mounted up to 100′ from the SMS Base

Features	SMS-H	RET-H	RET-H-HT
Transmits – EVAC ALL Comand to Grace Worn Devices and MS2000X	YES	YES*	YES*
Receives – MAYDAY PANIC Commands from Grace Worn Devices and MS2000X	YES	YES*	YES*
Recieves – and Displays Locator Beacon Information from Grace Worn Devices	YES	NO	NO
Displays up to 72 PASS with the ability to assign custom names	YES	NO	NO
16 open-collector configurable steering outputs	YES	NO	NO
Auxiliary Power Input – 12VDC/1A	YES	NO	NO
Powered Telephone Dialer Port – for use with ATD Automatic Telephone Dialer	YES**	NO	NO
FORM C Relay Outlet 12VDC/5A	YES	NO	NO
Switched Output on Alarm 12VDC/1A	YES	NO	NO
PASS Device Programmer	YES	NO	NO
Event Logger – ships with PC download Utility for extracting log files	YES	NO	NO
Wall Mount/Desktop Configuration	YES	NO	NO
Wall Mount Standard/Pole Mount Option		YES**	YES**
Battery Run Time – 24 Hours		NO	NO
Battery Run Time – 6 Hours in Alarm		NO	NO
AC Power Input 240VAC √**	120 VAC	NO	120 VAC
Automatic Telephone Dialer – Optional – Order Separately	YES	NO	NO
Heated Enclosure – for operation below 32°F – Optional	NO	NO	YES**

SMS Safety Monitoring EVAC System Features Chart (PDF)

√YES* Requires SMS Base
√YES** Order Separately