WorkForce Systems


The WorkForce® product line uses an advanced gyro/accelerometer sensor to detect a worker’s fall from heights and automatically transmits a wireless emergency alert without any action required by the worker. WorkForce® transmits this wireless emergency signal that is received by others facilitating a “prompt rescue”.

Personal fall arrest and fall restraint systems .. fall arrest devices .. active fall arrest .. safety harnesses and lanyards are just a few of the key words found around those who work at heights. The best fall protection plan will provide a user the means to self-rescue but what happens when a user is unable to self-rescue? What happens after a fall? Studies show that workers left hanging are at risk of suspension trauma, a deadly condition that can develop in a within less than 20 minutes. 

Workforce® Fall Detection and Suspension Trauma Prevention Systems are designed to help those who can’t help themselves and unable to self-rescue. WorkForce® detects a fall and  immediately notifies others initiating a  prompt rescue. 

WorkForce® goes beyond the minimum requirements of fall protection. After a fall, Workforce® is the answer to what happens next. 

Watch the videos and learn how Grace Fall Safety can protect your workers at height.



  • General Purpose All Duty Fall Detect and Lone-Worker Worn Device
  • Used in ‘Buddy Package’ or ‘Supervisor’ Device Configurations
  • Can Be Used with Grace Locator Beacons
  • GPS Option, Use with Grace-Watch® Mapping and/or WorkForce® WF2
  • Compatible with all Existing Grace Radio-H Based Systems
  • Internal Antenna
  • Rechargeable Internal Battery
  • IP67 Dust Tight / Water Immersion

Request a Quote





  • General Purpose/Supervisory-All Duty Fall Detect & Lone Worker Device
  • Used in ‘Buddy Package’ or as a ‘Supervisor’ to Monitor Other WorkForce® Users
  • High Visibility LED Display of WorkForce® Users Name/Location
  • Optional GPS Model for Use with Grace-Watch® and Mapping
  • Displays Grace Locator Beacon Location of Other WorkForce® Users
  • Displays Outdoor GPS Coordinates of Others (GPS Model) In Alarm
  • Can Be Used with all Existing Grace Radio-H Systems
  • Internal Antenna and Rechargeable Battery
  • IP67 Dust Tight / Water Immersion
  • EVAC (Evacuate) Button to Alert Other WorkForce® Users (Confined Space Model)

Request a Quote




Grace Industries offers WorkForce® product packages for fall arrest suspension trauma and a variety of safety applications.


The “Buddy Package” allows each worker to co-monitor the safety of other workers using the built-in alarm monitoring feature. The device has audio, visual, vibration, and alert features.

Buddy Package Contains:

  • Two WorkForce® model WF1 Alarm Monitoring Units

Request a Quote





The “Supervisor Package” includes alarm monitoring of coworkers and can display their name, ID, and location. The device has audio, visual and vibration alerting features.

Supervisor Package Contains:

  • One WorkForce® model WF1
  • One WorkForce® model WF2

Additional WorkForce® WF1 and WF2 and Locator Beacon units are available for purchase on our online store, allowing you to take full advantage of WorkForce® WF2’s ability to monitor multiple devices.

Request a Quote




Models of WorkForce

Feature Matrix

LW Lone Worker Model Default Auto-OnSM Supervisor Model Default Manual-OnCS Confined Space Model Default Top Button EVACAM
Alarm Monitoring Default Alarm Monitoring of all devices
GPS Outdoor Location Used with Grace-Watch MappingFront Button PANICTop Button PANICUsed with Grace Locator BeaconAlarm Display and Beacon IDDisplay Alarm and Beacon ID and GPS
WF1-LW-090-xxYES    YES YES  
WF1-LW-GPS-090-xxYES    YES YES  
WF1-SM-090-xx YES   YES YES  

* Features that are user configurable by using the USB configuration cable with Grace WorkForce PC software utility.

(-xx) Select Charger Type
-AC 120VAC -Wall Charger
-DC 12 VDC – Vehicular
-IC International Voltage

FACTORY DEFAULT 90 Second Motion Timing – Motion Timing is set to (090) seconds.
No Motion – when a user stops moving a timer begins to count down from the motion time setting.
The device will go into Pre-Alert approximately 15 seconds before he timer has reached full alarm at 0 seconds.
Pre-Alert is meant to prompt the user to move to reset the motion timer.
If the user moves during the Pre-Alert time, the Pre-Alert timer will reset, as long as it is not in full alarm.
If in full alarm, the user must press the two side buttons to reset the alarm.
Motion time setting is user configurable by using the USB configuration cable and Grace WorkForce software utility.

 WorkForce WF1WorkForce WF2
Product Dimensions2-1/4″ wide, 1-1/4″ deep
(without clip), 3-3/8″ high
2-1/4″ wide, 1-1/4″ deep
(without clip), 3-3/8″ high
Product Weight5.7 oz.5.7 oz.
Internal Battery3.7 V nominal. lithium-ion
3.7 V nominal. lithium-ion
Run Time in Sensing Mode40 hours / 24 hours GPS40 hours / 24 hours GPS
Run Time in Alarm Mode8 hours8 hours
Radio Frequency902 – 928 MHz ISM license
free, spread spectrum
902 – 928 MHz ISM license
free, spread spectrum
Battery Charger Voltage120VAC or 12VDC120VAC or 12VDC
Battery Charge Time3-4 hours3-4 hours
High Visibility OLEO DisplayNOYES

WorkForce® Specifications & Configurations Chart (PDF)




Register your WorkForce® products online within 60 days of your original date of invoice to receive an additional 12 months of Grace Industries Warranty for free!