In-Command First-in


https://vimeo.com/451616737

In-Command® First-In

  • (1) Emergency Signaling including MAYDAY, EVAC, PAR and ROLL-CALL
  • (2) Automated Wireless Accountability of ALL Personnel
  • (3) In-Command® First In, rapid mobile setup

 (1) Emergency Signaling with immediate notification and control:

  • MAYDAY, automatically sent upon motion time-out or pressing panic-button
  • EVAC, evacuate one, a group, or all Firefighters at any time
  • PAR, personnel accountability report with Firefighter acknowledgment, frees up voice radio channel and is configurable to your department’s protocol
  • ROLL-CALL, for escalated emergency signaling and Accountability

(2) Automated wireless Accountability of ALL Personnel at ALL times is achieved through the Firefighter’s use of the TPASS®5 and incident command and support personnel through the use of SuperCELL® SC500 or WorkForce® signaling units

  • TPASS®5 is the only NFPA compliant, stand-alone RF PASS available and has become the industry-benchmark of performance and first choice of Firefighters providing Accountability and emergency signaling including MAYDAY, EVAC, PAR and ROLL-CALL
  • SuperCELL®SC500 is the product of choice used by Incident Command, capable of monitoring all personnel safety with immediate notification of Firefighter MAYDAY and has the capability to immediately send EVAC signals to all Firefighters and personnel
  • WorkForce®models WF1 and WF2 are most often used by the many support personnel present at the emergency incident providing them with safety monitoring, Accountability and emergency signaling including EVAC, PAR and ROLL-CALL

In-Command® First In provides Automated Accountability and emergency signaling management of Firefighters with TPASS®5 and support personnel through the use of SuperCELL® SC500 or WorkForce® emergency signaling units. Protect ALL Firefighters at ALL times with In-Command®  

 (3) In-Command® First In operates using Android tablet software and the Incident Command Monitor. Rapid, easy setup makes First-In ideal for departments that need immediate Firefighter protection with minimal dedicated personnel. In addition to the tablet, the Incident Command Monitor serves as a separate, independent alarm monitor providing loud sirens and strobe light warning of a Firefighter MAYDAY. In-Command® First In provides Automated Accountability and many of the emergency signaling features as Full Crew while providing mobility for the incident commander. A fast, easy 3 step solution to safely monitor your Firefighters and provide Accountability: 

Step 1: Place the Incident Alarm Monitor on the Fire ground 

Step 2: Turn the key to the ON position to power up the system 

Step 3: System is actively monitoring Firefighter safety in 45 seconds Launch the In-Command® First In tablet app and begin actively monitoring your Firefighters and fire ground personnel.

In-Command® First In provides Automated Accountability and emergency signaling management of Firefighters with TPASS®5 and support personnel through use of SuperCELL® SC500 or WorkForce® emergency signaling units. Protect ALL Firefighters at ALL times with In-Command®

In-Command® Emergency Signaling Automated Accountability Systems Features:

  • NFPA-Compliant, RF PASS Emergency Signaling, and Automated Accountability System
  • Protects ALL Firefighters and ALL Fire ground Personnel at ALL times
  • Automated Accountability, knowing which Firefighters Fire ground personnel are present and safe
  • MAYDAY immediate notification, identifying the Firefighter by name
  • Automated PAR check, configure to your department protocol:
    • Does not use a voice radio channel
    • Set PAR time interval to your choosing, or on-demand
    • Eliminate chaos caused by poor, muffled voice quality
    • No longer interrupt fire ground operations to run a PAR
    • Know which Firefighters have or have-not acknowledged PAR
  • EVAC one, many or all Firefighters at the touch of a button without using voice radio
  • ROLL-CALL signaling to step up the level of your Firefighter safety checks
  • Firefighter Acknowledgements of receiving EVAC, PAR, ROLL-CALL signals
  • Operates on an autonomous radio system totally separate from the voice radios

** “NFPA 1500 specifies the minimum requirements for an occupational safety and health program for fire departments or organizations that provide rescue, fire suppression, emergency medical services, hazardous materials mitigation, special operations, and other emergency services.” Reference: https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=1500 The table below compares the primary features and capabilities of the In-Command® Full-Crew and First-In systems.

Feature

In-Command Full Crew

In-Command First-In (Android Tablet)

GRAPHICAL INCIDENT MONITORING • MONITOR SEVERAL HUNDRED USERS SIMULTANEOUSLY • ALARMS • BATTERY • NO SIGNAL • PAR STAGES • ROLL CALL STAGES • EVACUATION STAGES • DEVICE TYPE • ONLINE TIME • ONLINE COUNT

YES

YES

INCIDENT START / STOP

YES

YES

INCIDENT AUTO SAVE

YES

YES

WIRELESS CONNECTIVITY (WIFI)

NO

YES

CONNECTION KEEP ALIVE

YES

YES

USER GROUPING

YES

NO

PRIORITIZED DISPLAY

YES

YES

CONFIGURABLE DISPLAY PRIORITY TYPE

YES

NO

MONITOR ALARM CONDITIONS • MOTION ALARM • PANIC ALARM • HEAT ALARM • LOSS OF SIGNAL ALARM

YES

YES

POPUP ON ALARM

YES

YES

PLAY AUDIO ON ALARM AND EVACUATION

YES

YES

MONITOR NO SIGNAL CONDITIONS

YES

YES

MONITOR LOW BATTERY

YES

YES

PERFORM EVACUATIONS

YES

YES

PERFORM PAR

YES

YES

PERFORM AUTO PAR

YES

NO

INCIDENT EVENT LOGGING

YES

YES

INCIDENT RADIO TRAFFIC LOGGING

YES

YES

INCIDENT STATISTICS

YES

NO

EVENT NOTIFICATIONS (EMAIL, SMS, CANNED MESSAGE)

YES

NO

CANNED MESSAGE TX AND RX

YES

NO

USER LOCATING USING GRACE LOCATORS

YES

NO

RECEIVER BATTERY MONITORING

YES

YES

INTERNET CONNECTION DETECTION

YES

YES

INCIDENT CONFIGURATION • CONNECTION SETUP • NAME FILE CREATION • CHECK FOR NO SIGNAL • NO SIGNAL TIME • NO SIGNAL CAUSES ALARM • REAL TIME CLOCK MESSAGE • AUTO SAVE TIME

YES

YES

EXTENDED INCIDENT CONFIGURATION • MULTIPLE CONNECTIONS • CONFIGURATION PASSWORD PROTECTION • 10 AND AUXILIARY ID’s • TYPES • PLANS • POSITIONS • COMMANDERS • SHIFTS • RUN CARDS • RANKS • SECTOR • RESOURCE • CUSTOM AUDIO SOUNDS • CUSTOM COMPANY LOGO • NOTIFICATION SETUP

YES

NO

CREATE NAME FILES • ASSIGN ID’s • SET NAME • ASSIGN DEVICE TYPE

YES

YES

CREATE EXTENDED NAME FILES • USER PERSONAL INFORMATION • USER IMAGE • LEGACY SUPPORT • USER NOTES

YES

NO

INCIDENT LOCATION SETUP • INCIDENT 10 • INCIDENT LOCATION ADDRESS • INCIDENT DETAILS

YES

YES

EXTENDED LOCATION SETUP • PRE CONFIGURE LOCATIONS • LOCATOR BEACON MAPPING • LOCATOR GPS ASSIGNMENT • LOCATOR BEACON BATTERY MONITORING

YES

NO

CONFIGURATION BACKUP AND RESTORE

YES

NO

In-Command® Full-Crew and First-In Chart (PDF) In-Command® Full-Crew software operates on a Windows PC. In-Command® First-In software operates using a (Android) Tablet and connects to the Incident Alarm Monitor via a WiFi link. Please consult with our experienced sales professionals to discuss which option will best suit your needs. 

Product Literature 

Request a Quote 

Accessories 

 First-In Quick Start Video

https://vimeo.com/451622879

FIREFIGHTER TPASS/ACCOUNTABILITY

ALARM SYSTEMS


Product Manual


Product Brochure


Product Videos


Product Store


Request A Quote

NFPA Member Logo