
GRACEWATCH SAFETY ALERT SYSTEM
Grace-Watch® Software runs on a Windows-based PC and functions as an advanced safety monitoring system allowing virtually an unlimited number of workers to be monitored. Capabilities include showing a worker’s location, both indoors and outside when using Grace’s Locator Beacons and GracePoints?GPS® enabled worker-worn products. GraceWatch® uses the Grace MX900H radio transceiver (connected to host PC USB port) to send and receive signals with worker-worn products including TPASS®, SuperCELL® SC500 and WorkForce®. GraceWatch® Advanced Features include:- Alarm monitoring, showing the worker’s name, ID number and Location when a Motion time-out or Panic-button Alarm is received from the worker
- Evacuate signaling to one, some or all workers with Evac signal ‘received’ and ‘manual-acknowledgement’ by the worker
- PAR check, Personnel Accountability Report, GraceWatch® periodically and automatically sends a signal to each worker verifying their status ‘Report In’
- Roll-Call signaling, an on-demand signal sent to each worker verifying their presence, status and location update as part of an escalated response to an emergency event
- Mapping feature that imports your facility floor plan (PDF, jpg, etc.) with drag and drop setup of Grace Locator Beacons enabling the tracking and location of workers
- Outdoors mapping using Google maps, or ESRI/GIS cached maps shows location of workers using GPS-enabled Grace worker-worn safety products
- Geo-fencing feature to alert when a worker enters, or exits a specific area
- ‘Canned’ (pre-configured) text messages can be sent and received
- ‘Free-form’ (generated on demand) text messages can be sent and received
- SMS-text message and email Alerts, host PC requires internet connection
- SMS-text and email Alerts can be sent for various user-configurable conditions including worker Alarms, Evacuate and location changes
- ‘No-Signal’ Alarms can be monitored for workers and support equipment
- ‘Low-Battery’ indication of worker-worn products
- Monitoring of Grace support equipment including Locator Beacons, T3 Repeaters

LONE/WORKER
SAFETY SYSTEMS
Grace-Watch® Safety Monitoring Package for use with all Grace Worn Devices
Package contains Grace-Watch® Software and MX900-H Transceiver.
User provides Win7/10 OS computer with open USB port for connection to MX900-H Transceiver
Software and Hardware Features | GWML-H |
Receives and Displays MAYDAY Motion Panic and Manual Alarms from Grace TPASS ®3 and SuperCELL® SC500 | YES |
Transmits/Receives SEND CALL/EVACUATION Command Grace TPASS ®3 and SuperCELL® SC500 | YES* |
Transmits/Receives REPORT IN Commands from Grace TPASS®3 and SuperCELL® SC500 | YES** |
Transmits and Receives Canned Messages to/from SuperCELL® SC500 | YES |
Diplays Grace Locator Beacon and worker locations. Beacons are overlayed on a user provided .jpeg When the TPASS® and/or SuperCELL® pass a Locator Beacon, the beacon number is picked up and transmitted to the floorplan image | YES |
Capable of sending Text and Email Notifications (Requires Interenet/Network Connection) | YES |
Displays Outdoor GPS location as it is transmitted from the GPS model of SuperCELL® SC500-H-GPS with | YES |
Grace-Watch® Software and Hardware Features Chart (PDF)
√YES* – SEND CALL/EVAC (Evacuation) – When a SEND CALL command is transmitted from the Grace-Watch® system to a workers TPASS® and/or SuperCELL®, the worker receives a unique audio signal and responds by pressing the side buttons on the device to acknowledge the command displaying the acknowledged status on Grace-Watch®
√YES** – REPORT IN command is transmitted from Grace-Watch® System to a workers TPASS® and/or SuperCELL®, the worker receives a unique audio signal and responds brypressing the side buttons on the device to acknowledge the command with an “I’m OK” status that is received and displayed on Grace Watch®.
SuperCELL® SC500 with GracePoints GPS®
SC500-H-SM-GPS Supervisor with GracePoints GPS®
SC500-H-LW-GPS Lone-Worker with GracePoints GPS®
Features | Supervisor | Lone-Worker |
Receives EVACUATION Commands from Grace Monitoring Systems | YES | YES |
Receives PAR Check Commands from Grace Monitoring Systems | YES | YES |
Monitors Alarms from all Grace devices | YES | YES |
Transmits Motion Sensing Panic Alarm | YES | YES |
Transmits Manual Panic Alarm | YES | YES |
Receives/Transmits Canned Messages from other SC500’s and Grace-Watch® Safety Monitor | YES | YES |
Capable of Disabling Motion Sensing | YES* | NO |
Capable of Selecting Custom Motion Timing (Select in 15 second increments) | YES | NO |
Manual Power On/Off | YES | NO |
Auto Activation – Power On/Off Requires Powered Cradle. | NO | YES |
Transmits Indoor Grace Locator Beacon Position Data | YES | YES |
Displays Indoor Grace Locator Beacon Position Data on Grace-Watch® and othe SC500’s | YES | YES |
Interfaces with customer provided Automotive Telematics for Mobile Lone Worker Solutions | YES | YES |
Transmits Outdoor GPS Position Data – Requires Grace-Watch® Monitor for display ** | YES | YES |
Select Motion Timing when ordering – Changes require USB-IRP Dongle for changes – Sold seperately | NO | YES** |
Rechargeable 24 Hour Operation | YES | YES |
Recharge Time – 6-8 Hours | YES | YES |
Charger Type – 12 VDC, 120VAC, or International – Select when ordering | YES** | YES** |
Audio Sound Pressure (dBA) @ 10′ when in PANIC/PAR/EVAC | 75 dBA | 75dBA |
Heavy Duty – IP67 Rated | YES | YES |
Intrinsically Safe | YES | YES |
Grace-Watch® Supervisor & Lone Worker Features Chart (PDF)
√YES* User Configurable
√YES** Select Model When Ordering
** The GPS outdoor location feature of GracePointsɸGPS® is used with Grace-Watch® monitor System and requires an Internet connection to Google maps.